Moon Exports Pvt. Ltd. well experienced in fabrication of exclusive granite & other natural stone edge profiles. You know…making a special granite edge profile is a labor intensive work which requires exactness and we have perfection in this demanding art. We are the bulk suppliers of marble countertops, granite countertops, limestone countertop and onyx countertops with the required stone edge profiles.

Edging and Profiles add a wonderful dimension to natural stone tops and amplifies their natural beauty although they incur some additional costs per running meter / per linear foot, depending upon which edge profile is selected. It is important to note that Standard (SQUARE /STRAIGHT/SHARP) edges are always included in our price estimates.

We suggest you to choose the right edge profile for your granite, slate stone, marble, sandstone, limestone and quartzite countertops, vanity tops because a proper edge profile adds beautiful impact to the natural stone slab’s & tile’s surface and helps integrate it into the overall design of your living room.

Here we are showing you some natural stone edge profiles which are being demanded by the overseas clients in general for kitchen countertops, bathroom countertops, table tops, bar tops and other type of counters:

Eased Edge / Flat Edge

This edge treatment is very common and offers a clean and simple look for your granite counter tops, marble countertops. This edge is used on most granite backsplashes. Of all stone counter top edges like marble, sandstone, slate stone….granite is the hardest to work with.

Half Bullnose or Roundover Edge

The half bullnose edge can also be called the roundover because instead of being squared off, it is rounded over. It offers a smooth and round surface. It can show a larger cross section of your stone. This edge is usually the least expensive treatment that gives you some rounding.

New Post with Featured Image

Unlike its name implies, this is not 1/2 of a bullnose. This edge is very smooth and flowing and shows a large cross section of the countertop making it appear thicker.

Full Bullnose Edge

The full bullnose offers perhaps the most contemporary look of the granite, marble, sandstone and slate stone edges. A side view of full bullnose shows the shape of a half circle. The full bullnose is gentle on the body and has no edges to chip. It also tends to make granite counter tops or marble countertop, slate stone countertops look thinner. The Full Bullnose edge profile is the most popular & demanding all over the world.

Bevel Edge

Bevels are 45 degree cuts into the edge of the stone. The deeper the cut, the wider the bevel face is. If the natural stone has a tendency to chip, a bevel edge may chip more than a rounded edge will.

Ogee Edge

From the side, an ogee edge forms the shape of an “S”. This is often the most elaborate edge treatment offered by fabricators. It’s usually the most expensive as well. Ogee is used for a more traditional look.

Dupont Edge

Sometimes called “Bird’s Beak”, the Dupont edge looks like a demi bullnose with a notch at the top. On certain natural stones it may have more of a tendency to chip.

Triple Waterfall Edge and Laminated Edge

Very elaborate edge profiles can be made with special router bits like this Triple Waterfall. Real craftsman can create an unlimited array of edges by gluing together different profiles. These edges can make granite or marble counter top appear very thick throughout. Of all the granite countertops edges, this is the most expensive one.